arista
26-08-2022, 01:26 PM
https://upload.wikimedia.org/wikipedia/commons/thumb/d/d2/Czinger_21C_FOS2022.jpg/560px-Czinger_21C_FOS2022.jpg
https://www.electrichybridvehicletechnology.com/wp-content/uploads/2020/03/1869813_3.-Czinger-Czinger-21C-London-UK-reveal-of-both-cars-decklid-up-1024x683.jpg
The CEO Kevin Czinger
was on CNN HD Business
yesterday
It was featured on BBC Top Gear - I do not watch that.
[A revolutionary new concept in vehicle
manufacturing has been unveiled
with US startup Czinger taking the wraps
off its 21C – a hybrid hypercar that is
built from a number of 3D-printed parts
and propelled by the world’s most power-dense engine.]
[Adding to its performance is the fact the
car weighs just 1250kg,
giving it a 1:1 power-to-weight ratio.
This is thanks to the in-house,
revolutionary technology used to
custom design and optimize each 21C
component to meet its function
and form requirements.
For example, the front upper control
arm is hollow with a three-dimensional
internal structure and uses proprietary,
high-performance alloys specifically
designed for the functionality of
the component.
As a result, its weight is a fraction
of a traditionally tooled variant and
it is significantly stronger, thereby reducing
un-sprung mass and increasing performance.]
80 have been sold
to international buyers.
https://www.electrichybridvehicletechnology.com/news/oem-news/czinger-21c-3d-printed-1250hp-hybrid-hypercar-unveiled.html
https://en.wikipedia.org/wiki/Czinger_21C
https://www.electrichybridvehicletechnology.com/wp-content/uploads/2020/03/1869813_3.-Czinger-Czinger-21C-London-UK-reveal-of-both-cars-decklid-up-1024x683.jpg
The CEO Kevin Czinger
was on CNN HD Business
yesterday
It was featured on BBC Top Gear - I do not watch that.
[A revolutionary new concept in vehicle
manufacturing has been unveiled
with US startup Czinger taking the wraps
off its 21C – a hybrid hypercar that is
built from a number of 3D-printed parts
and propelled by the world’s most power-dense engine.]
[Adding to its performance is the fact the
car weighs just 1250kg,
giving it a 1:1 power-to-weight ratio.
This is thanks to the in-house,
revolutionary technology used to
custom design and optimize each 21C
component to meet its function
and form requirements.
For example, the front upper control
arm is hollow with a three-dimensional
internal structure and uses proprietary,
high-performance alloys specifically
designed for the functionality of
the component.
As a result, its weight is a fraction
of a traditionally tooled variant and
it is significantly stronger, thereby reducing
un-sprung mass and increasing performance.]
80 have been sold
to international buyers.
https://www.electrichybridvehicletechnology.com/news/oem-news/czinger-21c-3d-printed-1250hp-hybrid-hypercar-unveiled.html
https://en.wikipedia.org/wiki/Czinger_21C